From a previous post by Anon411
********************************************************************
I have read your website and downloaded a copy by the cut and paste method. You could flesh out some of you links by linking to relevant documents on the ARRL site, Wikipedia, or other. This saves a lot of creative effort on subjects covered elsewhere.
You mention meshing the ComPlan and ComCon plans with to address different disasters. I suggest this page https://www.theorganicprepper.com/history-disasters/ is a good list of possible disasters to work with.
—-reply—-
Yep,, I could. However I really don’t seem to want to continue with that project. Too bad to cause there is a lot that could be of benifit to the newbie. However I just do not want to dedicate the time effort and $$ that it needs.
=================================
Interesting story on the Cross-band network you built. More info needed. Can you point to a book or web page providing detailed information?
—reply—-
There is nothing published about that technique. I made it up to fit the needs of the project. Basically it uses sub-audible tones to create a “select call” system that allows the individual selection of specific cross-band (XB) repeaters. The way it was set-up is a bit complex for me to write up in an understandable way. However the technique is an adaptation to another select call (SELCAL) system. Here is a link to my public dropbox file. It will download a protocol I developed for teaching SELCAL technique several years ago.
https://www.dropbox.com/s/iqxytz03jddg75n/Tone%20100%20SelCal.pdf?dl=0
Take a look at that and if you want more detailed information on the topic let me know. Oh, at one point I have a wrong frequency specified. 156.52 instead of 146.52.
==================================
You referenced several times to Storage. I would like more info on that.
—reply—
I found my notes on storage and am working on editing it a bit. I will then make it a PDF and put it on dropbox. That method, creating a PDF and using dropbox is much easier than dealing with a web page or blog. Let me know if there is any problem as I may continue to use that technique if it works ok.