Home › Forums › Security & Defense › Weapons › 8 Affordable Home-Defense Shotguns Under $200
This topic contains 12 replies, has 4 voices, and was last updated by namelus 1 year, 6 months ago.
-
AuthorPosts
-
November 19, 2018 at 11:20 am #4840
-
November 19, 2018 at 12:18 pm #4844
I don’t know if cheap is way to go with this, low cost yes but cheap has issues, and with this is immediately life threatening.
Would say pay 200 more and get a low range quality firearm or buy a gently used one. Make sure you get range time and understand most houses offer concealment only not like on TV shooting through doorways and Noone shoots through dry wall like it is concrete.
Also with shot gun it is a what happens to missed shots ie what is behind the area you are shooting at, what if it is a sensitive place or has other family members.
I also prefer number 1 buck shot, 00 is 38cal 1 is 32 caliber but you get 2 more pellets with 1. Learn about cut shells, combat loading +practice. Have a defense point that is more than dry wall…. if your house take off drywall and sandbag inside then close up.
-
November 19, 2018 at 12:28 pm #4846
The only one I have personal experience with is the Mossberg Maverick 88. As long as you cycle the action correctly and dont short slide it, it is reliable. But that could be said with any pump action shotgun.
-
November 19, 2018 at 5:16 pm #4864
Norinco produces some fairly good firearms, mostly take-offs or full clones of iconic American firearms. After all, they produce arms for the Chinese military. I doubt I’d put my life to trusting anything made in Turkey, however. I would place the Turks only slightly above the Pakistanis. Still, its better than a sharp stick or a pocket of rocks if you absolutely, positively could not afford ANYTHING else. Besides, I’m not one of those fans of a shotgun for home defense.
-
November 20, 2018 at 6:14 pm #4969
For commercial products I would put the Turks miles ahead of the Chinese.
Worked on too many Chinese junkers. The military quality is not what they are making in the sporting copies.
One Ithaca 37 copy stopped working within a box of trap loads.
I may not like the political scene in Turkey but they are putting out decent guns.
The Canik’s and CZ clones for example.
-
November 20, 2018 at 7:15 pm #4978
I have an acquaintance that has one of the Norinco MiA clones and its flawless and a lot cheaper than Springfield Armory. Takes all the same upgrades and interchanges with western M14 parts. When a company says that they have improved the quality, that means to me that all their previous stuff was junk. I get fliers from Dick’s Sporting Goods where their ‘plain Jane” model Remington 870 is only a few dollars more than the imports. What’s your life worth?
-
November 21, 2018 at 5:01 am #5001
I have m1a clone and a Springfield, I can 800 yard plus with Springfield, norinco not a chance in hell even with upgraded spring, ops rod and barrel the loading breach are just not close enough spec and cheap steel.
Reason I changed barrel was I shot out rifleing in norinco in 2000 rounds of hand load brass.
5000 through the spring field and now it is beginning to fail.
-
This reply was modified 1 year, 6 months ago by
namelus. Reason: Typo
-
November 21, 2018 at 10:02 am #5014
Norinco may be hit or miss. Some owners say they are satisfied.
I once had a Springfield M1A before the snowflakes made Springfield grind off the bayonet lugs. (All those drive-by bayoneting, you know!) I didn’t put a box of shells through it before someone wanted it more than me. Kick myself everytime I think about having traded it off!
-
This reply was modified 1 year, 6 months ago by
-
November 21, 2018 at 9:57 am #5011
Well, the point of the article was affordable shotguns for those on a budget.
All depends on who makes it, to differing specs determine quality vs where it came from. I know of two Turkish airgun manufactures. One puts out good quality air rifles at decent prices. A newer company, them not so much. But I think they have improved in the QC.
Do the research, talk to people who own shotguns, talk to the local gun shop. Make an informed decision.
And if you can, test one out.
-
November 21, 2018 at 10:44 am #5020
Yeah, I had a Springfield NM M1A, but due to a economic crisis, I had to sell it and all my competitive shooting gear.
Serious bummer.
-
November 21, 2018 at 3:16 pm #5046
JM,
As I recall, you are north of the border, and can still get the Norc stuff. It’s been 24 years down here for much of it.
Call me crazy but I don’t think paying scalpers prices for something that wasn’t as good.
-
November 21, 2018 at 3:26 pm #5047
Could you reiterate your post. I don’t understand it.
-
-
November 21, 2018 at 9:20 pm #5080
I have a spx winchester defender marine, it is well made for a cheap shot gun up here it has to be over 18 inches of barrel or it falls in a restricted class. It was $250 plus tax brand new when I aquired it many moons ago.
I can’t see buying a benelli for over 5000, but I would not trust a 200 at today price shot gun, just to get there it will have to be made cheaply with comprise on parts quality.
I would use $$ and go to gun show to look for a good gently used one of better quality. New in guns is a relative thing, as long as cared for and maintained older for less money usually works out.
-
AuthorPosts
You must be logged in to reply to this topic.
